Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Slab gate valve (Through conduit gate valve) has been designed as per API6D standard, including soft sealing slab gate valve, metal to metal sealing slab gate valve and expanding slab gate valve. Slab gate valves are mainly used for oil& gas, water pipelines, the design has two floating seats,grease injection system and double block & bleed system.
Flanged ends cast steel gate valve are used to cut or conect the pipe mediua under nominal pressure from 150Lb to 2500Lb, temperature between -46 to 600C. In oil, gas, chemical industry, power plants and other conditions.
Swing check valves are designed as per API6D/ABS1868/DIN/GHOST/GB standards, with bolted bonnet and pressure sealing bonnets. These check valves are mainly used for Oil, Gas, water pipelines, and soft sealing check valve also can be used for Natural gas with zero leakage.
Fully welded ball valve
 Skype Online
|
E-mail Us
|
Bookmark this
|
 PDF Download
|
FULLY WELDED BALL VALVES
(Floating & Trunnion mounted ball design)
Technical Features
|
Service |
Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium. |
|
Design Body |
Fully welded body |
|
Bore |
Full bore/Reduce bore |
|
Bonnet Design |
End entry |
|
Ball Design |
Floating mounted ball/ Trunnion mounted ball |
|
DBB/DIB Design |
For trunnion mounted ball valves |
|
Size |
1/2”-64” |
|
Pressure |
150Lb-2500Lb |
|
Design temperature |
-46-200℃ |
|
Main materials |
Forged Carbon Steel |
|
Seat sealing type |
Soft sealing/Metal to Metal sealing(Stellite/TC overlayed) |
|
Operation |
Manual, Electric, Pneumatic, Gas over oil, Electro-hydraulic actuator.(Rotork, Biffi, DVG, ect.) |
|
Design Standard |
API608/API6D/AWWA/BS5351/ISO17292/DIN/GB/GHOST |
|
Face to face |
ASME B16.10/ API6D |
|
Ends |
RF/RTJ to ASME B16.5/ASME B16.47, BW to ASME B16.25, SW to ASME B16.11, Thread ends to ASME B1.20.1 |
|
Pressure and Temperature Design |
ASME B16.34 |
|
Test standard |
API6D/API598, ISO5208 |
|
Fire safe |
APIF6A/API607 |
|
Others |
Anti static design, Anti blow-out stem design, NACE MR0175/ISO15156(if applicable) |
If you have any enquiry about quotation or cooperation,please feel free to email us at salesmanager@kairute.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.
Social Responsibility Report(社会责任报告)
Quality Integrity Report(质量诚信报告)
Copyright © 2016 KAIRUITE VALVE CO.,LTD Allrights reserved. 浙ICP备15013640号-1 | | Privacy Policy | Sitemaps | XML
