Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Slab gate valve (Through conduit gate valve) has been designed as per API6D standard, including soft sealing slab gate valve, metal to metal sealing slab gate valve and expanding slab gate valve. Slab gate valves are mainly used for oil& gas, water pipelines, the design has two floating seats,grease injection system and double block & bleed system.
Flanged ends cast steel gate valve are used to cut or conect the pipe mediua under nominal pressure from 150Lb to 2500Lb, temperature between -46 to 600C. In oil, gas, chemical industry, power plants and other conditions.
Swing check valves are designed as per API6D/ABS1868/DIN/GHOST/GB standards, with bolted bonnet and pressure sealing bonnets. These check valves are mainly used for Oil, Gas, water pipelines, and soft sealing check valve also can be used for Natural gas with zero leakage.
Power station gate valve
Power station gate valves are designed with forged or casted body, these valves are mainly used for high temperature pipeline, upto 600C, especial for power station, nuclear station, steam pipelines, to cut off the medium, all seat sealing is stellite overlayed to meet the high abrasive medium , to ensure the good quality of sealing.
Technical Features :
|
Service |
Power station, nuclear station, steam pipeline, hot water and other high temperature pipeline. |
|
Design Body |
Pressure sealing bonnet |
|
Bore |
Standard |
|
Wedge type |
Flexibe wedge/ Solid wedge |
|
Design |
Outside screw & Yoke, rising stem |
|
Size |
1/2”-24" |
|
Pressure |
150Lb-2500Lb |
|
Design temperature |
-29-600℃ |
|
Main materials |
WCB/WC6/WC9/CA15/F11/F22/F91/SS304/SS316 |
|
Seat sealing type |
Integral seat/ Separate seat |
|
Seat sealing material |
13Cr/Stellite |
|
Operation |
Manual, Electric, Pneumatic, Gas over oil, Electro-hydraulic actuator.(Rotork, Biffi, DVG, ect.) |
|
Design Standard |
API600/BS5352/DIN/GB/Ghost |
|
Face to face |
ASME B16.10/Ghost /DIN/GB |
|
Ends |
RF/RTJ as ASME B16.5/ASME B16.47 , BW to ASME B16.25,SW to ASME B16.11 |
|
Pressure and Temperature Design |
ASME B16.34 |
|
Test standard |
API598 |
|
Fire safe |
APIF6A |
|
Others |
Anti static design, Anti blow-out stem design, NACE MR0175/ISO15156(if applicable) |
Copyright © 2016 KAIRUITE VALVE CO.,LTD Allrights reserved. | | Privacy Policy | Карта сайта | XML
