Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Oil, Natural gas, Water and Chemical Transmission Pipeline application, Metal to metal sealing ball valves can be used for rubbing, abrasive, corrosive and high temperature medium.
Slab gate valve (Through conduit gate valve) has been designed as per API6D standard, including soft sealing slab gate valve, metal to metal sealing slab gate valve and expanding slab gate valve. Slab gate valves are mainly used for oil& gas, water pipelines, the design has two floating seats,grease injection system and double block & bleed system.
Flanged ends cast steel gate valve are used to cut or conect the pipe mediua under nominal pressure from 150Lb to 2500Lb, temperature between -46 to 600C. In oil, gas, chemical industry, power plants and other conditions.
Swing check valves are designed as per API6D/ABS1868/DIN/GHOST/GB standards, with bolted bonnet and pressure sealing bonnets. These check valves are mainly used for Oil, Gas, water pipelines, and soft sealing check valve also can be used for Natural gas with zero leakage.
Top entry ball valve
(Trunnion/floating desing, soft sealing or Metal to metal sealing)
Top entry ball valve has been designed with top entry, integral body, and this valve also can be designed with floating and trunnion mounted ball, forged or casted material. Top entry ball valve is easy to do on line maintanence, no need to dismounte from pipeline.
Technical Features :
|
Service |
Oil, Natural gas, Water and Chemical Transmission Pipeline application, metal to metal sealing can be used for some abrasive medium. |
|
Design Body |
Integral body (One piece body) |
|
Bore |
Reduce bore or full bore |
|
Bonnet Design |
Top entry |
|
Ball Design |
Floating mounted ball |
|
DBB/DIB Design |
Not applicable |
|
Size |
1/2”-64” |
|
Pressure |
150Lb-2500Lb |
|
Design temperature |
-46-200℃ |
|
Main materials |
CS/SS/Duplex stainless steel/Bronze/Inconel/Titanium alloy steel |
|
Seat sealing type |
PTFE/RPTFE/Nylon/Devlon/PEEK/Hard sealing |
|
Operation |
Manual, Electric, Pneumatic, Gas over oil, Electro-hydraulic actuator.(Rotork, Biffi, DVG, ect.) |
|
Design Standard |
API608/API6D/AWWA/BS5351/ISO17292/DIN/GB/GHOST |
|
Face to face |
ASME B16.10/ API6D/DIN |
|
Ends |
RF/RTJ as ASME B16.5, BW to ASME B16.25, SW to ASME B16.11, Thread ends to ASME B1.20.1 |
|
Pressure and Temperature Design |
ASME B16.34 |
|
Test standard |
API6D/API598, ISO5208 |
|
Fire safe |
APIF6A/API607 |
|
Others |
Anti static design, Anti blow-out stem design, NACE MR0175/ISO15156(if applicable) |
Social Responsibility Report(社会责任报告)
Quality Integrity Report(质量诚信报告)
Copyright © 2016 KAIRUITE VALVE CO.,LTD Allrights reserved. 浙ICP备15013640号-1 | | Privacy Policy | Sitemaps | XML
